Staff Blogs/News

Silicone Revolution & Fluorine Revolution | What are Next-Generation High-Class Coatings? We will introduce them here!

Hello! This is Kakeru Koumuten Co., Ltd.!

Construction site illustration

This time, we would like to introduce our recommended next-generation high-class silicone paint and next-generation high-class fluorine paint from Astec Paint!

The paint manufacturer Astec Paint, which we are about to introduce, has the number one heat-insulating paint in the industry!
The drawback of heat-insulating paint has been its high cost and low durability
However, the paint we are about to introduce is truly revolutionary, offering high heat insulation at a low cost and high durability!

If you’re interested, please take a look!

Next-Generation High-Class Silicone Paint from Astec Paint

Silicone REVO1000-IR

Next-Generation High-Class Silicone Paint

Silicone REVO1000 (-IR) Water-based Single-component Silicone Topcoat for Exterior Walls

This paint is meticulously crafted with acrylic silicone resin and pigments, achieving three essential functions of paint at a high level.

Manufacturer Astek Paint
Durability (Years) 13-16 years
Features Heat-insulating paint
Type of Paint Silicone

◎Weather Resistance ①

The amount of silicone components that are resistant to deterioration is approximately three times that of typical silicone paints.

(Weather resistance refers to the property of polymer materials, such as paints, that makes them less likely to undergo changes such as deformation, discoloration, or deterioration when used outdoors.)

◎Weather Resistance ②

Weather resistance is enhanced by the use of white pigments that control deterioration factors known as radicals.

  • Richly blended with silicone components that are resistant to deterioration.

  • Contains radical control type white pigments.

  • In accelerated weather resistance tests (xenon lamp type), it maintains a gloss retention rate of over 80% even after approximately 13-16 years (expected service life).

It exhibits high weather resistance against ultraviolet rays and rain, protecting the building for a long period!

Additionally, the use of inorganic pigments that suppress color fading makes it less likely to discolor or fade.

*These are merely estimated values under test conditions and do not guarantee weather resistance. Actual weather resistance may vary depending on the condition of the substrate, construction methods, and weather conditions in natural exposure environments.

◎Low Pollution

It exhibits low pollution properties due to the resin made from a strong (flexible and durable) layer.

Typical silicone paints use acrylic silicone resins that have high flexibility at the surface, making them prone to dirt adhesion. However, Silicone REVO1000 (-IR) coats a flexible layer with a strong layer.

This structure makes it difficult for dirt to adhere to the paint film surface, maintaining the building’s aesthetics and suppressing the growth of mold and algae, contributing to aesthetic maintenance.

○Heat Insulation *Only for Silicone REVO1000 (-IR)

It exhibits high heat insulation due to the use of heat-insulating black inorganic pigments.

By forming a paint film that effectively reflects near-infrared rays, it contributes to suppressing indoor temperature rise with a high solar reflectance rate, enhancing living comfort.

Supported Materials

Concrete, mortar, ALC, ceramic siding, colored copper plates, aluminum, Galvalume copper plates, stainless steel, corrugated slate

Color Variations

You can use 69 standard colors from Astec. *Please note that color samples may differ from actual colors depending on your PC environment. If you want to confirm the correct color, please check the color sample book or color sample board!

 

Additionally, the Silicon Revolution includes,

Non-heat-resistant Silicon Revolution REVO1000, with two types available in the lineup.

Non-heat-resistant Silicon Revolution REVO1000 also adds high “weather resistance” and “low contamination” that surpasses conventional silicone paints, making it an exterior wall paint that beautifully protects buildings.

Next-Generation High-Class Fluorine Paint from Astec Paint

Fluorine Revolution

Next-generation high-class fluorine paint

Fluorine REVO1000 (-IR) water-based single-component exterior wall fluorine topcoat

Meticulously selected and blended fluorine resin to achieve three essential functions for long-lasting and beautiful protection of buildings at a high level.

 

Manufacturer Astec Paint
Durability Years 16-20 years
Features Heat-insulating paint
Type of Paint Fluorine

◎Weather Resistance

Long-term protection of buildings from deterioration factors such as ultraviolet rays.

  • Richly blended with fluorine components.
  • Contains a fully cross-linked fluorine resin that is strong against deterioration.

  • In the accelerated weather resistance test (xenon lamp type), after approximately 16 to 20 years (expected service life), the gloss retention rate remains above 80%.

  • Weather resistance is improved by using radical control type white pigments.

Additionally, the use of inorganic pigments that suppress discoloration makes it less likely to experience fading or color changes.

*These are merely estimated values under test conditions and do not guarantee weather resistance. In actual natural exposure environments, weather resistance may vary depending on the condition of the substrate, construction methods, and weather conditions.

◎ Low Pollution Properties

Fluororesin used in general paints tends to attract dirt on the surface of the coating. However, Fluor REVO1000 (-IR) has a strong and resilient surface that makes it difficult for dirt such as sand and dust to adhere, and it is less likely for exhaust gases to penetrate, which helps maintain its aesthetic appeal.

○ Heat Insulation Properties *Only for Fluor REVO1000 (-IR)

Fluor REVO1000 (-IR) has a higher solar reflectance than carbon black and other pigments used in general paints. By utilizing titanium composite heat-insulating inorganic pigments that absorb less heat, it forms a coating that effectively reflects near-infrared rays, which are a factor in temperature rise, thereby suppressing temperature increases.

Compatible Materials

Fiber cement siding, mortar, concrete, ALC, corrugated slate (exterior walls), colored copper plates, aluminum, galvalume copper plates, stainless steel

It can be used for a wide range of applications.

Color Variations

You can choose from 69 standard colors from Astec. *Please note that color samples may differ from actual colors depending on your PC environment. If you want to confirm the correct color tone, please check the color sample book or color sample board!

 

Additionally, there is also a

Non-heat-resistant Fluor Revolution REVO1000, and two types are available in the lineup.

Non-heat-resistant Fluor Revolution REVO1000 is a high-class fluorine paint that surpasses the weather resistance of conventional one-component water-based fluorine paints. It is well-balanced with the necessary performance to protect buildings for a long time.

Summary

That concludes the introduction of the Silicon Revolution and Fluor Revolution!

At Astec Paint, we offer a wide range of high-quality and low-cost paints, and among them, the recommended paints are the Silicon Revolution and Fluor Revolution, which we confidently recommend!

At Kakeru Koumuten Co., Ltd., we will introduce plans and paints that suit our customers, allowing them to easily compare with paints from other manufacturers. Please feel free to consult with us!

 

Estimates and inspections are, of course, free! If you have any concerns regarding roofs, rain gutters, exterior walls, or exteriors, please consult Kakeru Koumuten Co., Ltd.!
We carry out everything from temporary scaffolding work to roof construction and exterior painting work with complete in-house execution. We are confident that we will not be outdone in terms of cost, quality, and organization compared to other companies in exterior construction!
We welcome competitive estimates with confidence!
You will be glad you chose us! We take every request seriously to ensure you are satisfied.

We look forward to your inquiries. Thank you very much.

For helpful information about exterior renovations, click here!

LINE consultations are also very welcome◎

We are also updating our Instagram regularly◎ Please follow us, thank you◎

 

For roofing, guttering, and exterior work and repairs in Kanagawa, contact Kakerukoumuten Co., Ltd..

AAA is a young company with an average age in the early 20s, but our technology is second to none.

One of our greatest strengths is that we can do all of our own scaffolding, roofing, and painting work. In this industry, where work is generally divided, we are able to provide a complete set of services, which saves time and effort in management and reduces costs. Above all, if there is any trouble, we will come to you right away!

We can confidently declare this. We are the youngest and most friendly renovator in Kanagawa!